Nokia Secret Code

 

MOBILE CODES

Nokia Codes

Motorola Code

Panasonic Codes

Sagem Codes

Samsung Codes

Sony Codes

GSM Codes
IMI
Ericsson

Short Hand for Nokia

Nokia
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # lub * # 9 9 9 9 #

Sim lock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 1
Network lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 2
Provider lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 3
SimCard lock status: # p w + 1 2 3 4 5 6 7 8 9 0 + 4
1234567890 - MasterCode which is generated from IMEI

Detailed Notes for Nokia

To view IMEI number *#06#
To view Software Version enter *#0000#
To view Status of Sim Clock Stop. Enter *#746025625#
Latest Version is under Phone Info
Type is NSE-3NX
*#92702689# offers you Serial Number and also IMEI number. There are various options to scroll here.
The code is easier to remember as *#war0anty# (warranty)
The next screen is the date of manufacture in the format Made: 1197
The next screen is the purchase date in the format Purchasing Date: 1197 (this can be edited)
The next screen has Repaired: 0000 (presumable at repair the date is entered)
The next screen has Transfer User Data? (the same option as the 8110)
To exit turn the phone off and then back on.
*3370# to activate Enhanced Full Rate (*efr0#)
#3370# to deactivate Enhanced Full Rate (#efr0#)
*4720# to activate Half Rate (*hra0#) ONLY IN SOFTWARE VERSION V4.33 OR EARLIER
#4720# to deactivate Half Rate (#hra0#)
After pressing these codes the phone will shut down and start up again with the service activated/deactivated.
Unlock SP lock
Here is a way to Unlock your phone which is Service Provider locked, without to know SP Lock code !!!!
Give it a try:
First of all, PIN CODE MUST BE ON, then press:C
C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04* * *your pin#
Each time you turn your phone OFF it resets the lock, so this need to be done each time you'll turn your phone ON :-(
Anyway it's better than nothing, isn't it?
6110 Sim Card Locking
There are four different types of Sim Locks on the 6110 (not sure about 5110 yet).
1 = Country Lock - Lock to Specific Country
2 = Network Lock - Lock to Network
3 = Provider Lock - Lock to Service Provider
4 = Sim Lock - Lock to Specific SIM Card
To see the status of your phone
#pw+(mastercode)+X#
(mastercode) is a 10 digit number WITHOUT the brackets.
X is a number 1 through 4, it shows the above locks. Not sure of which numbers are assigned to which lock yet. (The numbers above stand for X => for example: 1 = Country Lock
Sim not restricted message means your phone is NOT sim locked - Check all 4 to be sure.
Most SIMs are locked with the Service Provider Lock => f.e. to the network of MAX

Adding NEW Ring Tones
Set SMSC to +358405202999 (Smart Messaging)
Send a SMS to 99999 with the word TONES in the message
When you get the reply, edit the message so that the tone that you want does not have a asterisk in front of it. Now send the message to 99999. The phone will display NEW RING TONE RECEIVED.
Turning on Car Kit and Head Set Menus (Cannot be turned off)
To enable the headset-function, you have to short-circuit the "3" and "4". After a short time there is "Headset" on the display Now, menu 3-6 is now enabled!
To enable the car kit-function you have to short-circuit the "4" and "5". After a short time, "Car" is shown on the display and the menu 3-7 is enabled!!
If you short-circuit the left and the right contact with the middle contact ("3", "6" and "9") the Nokia Software hangs! The profile "Headset" will be activated. Before you do this, just active the "auto call receive" function in the headphone profile and set the ringing volume to "mute" Now you can use your phone for checking out what people are talking about in a room. Place the phone somewhere under a table in this room and call your phone! The phone receives the call without ringing and you can listen to the words these people are talking about!

Nokia 1610

To view IMEI number *#06#
To view Software Version enter *#170602112302#
Latest Version is under Phone Info
Pin outs
Desktop Charger----------------------|
| |

| |

CHARGER--| + TOP OF PHONE -

V V 1 2 3 4 5 6 V

(o) | | [= = = = = =] | |

7 8 9 10 11 12
1 GND Digital Ground

2 V_OUT Accessory Output Supply. (Min/Typ/Max - 3.25V...10V - Output Current 50mA)

3 XMIC External Microphone Input and Accessory Identification

Identification

*TYP/MAX: 8...50 mV (The Maximum Value Corresponds to 0dBm Network

LEVEL WITH INPUT AMPLIFIER GAIN SET TO 20 dB ,TYPICAL VALUE IS MAXIMUM VALUE -16 dB)

ID Accessory Identification

*1,7...2,05 V HEADSET ADAPTOR CONNECTED

*1,15...1,4 V COMPACT HANDS FREE UNIT CONNECTED

4 NC Not Connected

5 NC Not Connected

6 MBUS Serial Control Bus

*Logic Low Level: 0....0.5V

*Logic High Level:2.4V....3.2V

7 NC Not Connected

8 SGND Signal Ground

9 XEAR External Speaker and Mute Control

*Min/Typ/Max: 0....32....500 mV (Typical level corresponds to -16 dBM)

Network Level with Volume Control in Nominal Position 8dB Below Maximum

Maximum 0 dBM Maximum Volume Codec Gain -6dB)

Mute ON (HF SPEAKER MUTE ):0...0,5 V d.c.

Mute OFF (HF SPEAKER ACTIVE ): 1,0...1,7 V d.c.

10 Hook Hook Signal

*Hook Off (Handset in Use): 0....0.5V

*Hook On (Handset in Use): 2.4V....3.2V

11 NC Not Connected

12 V_IN Charging Supply Voltage (Max 16V)

Nokia 2010

To view IMEI number *#06#
To view Software Version enter *#9999#
Nokia 2110

To view IMEI number *#06#
To view Software Version enter *#9999#
Latest Version is under Phone Info
Type is NHE-1XN
Unlock SP lock
Here is a way to Unlock your phone which is Service Provider locked, without to know SP Lock code !!!!
Give it a try
Turn the phone on, when the phone asks for the Security Code,
press:
112
now quickly press:
#
send
end
send
end.
Each time you turn your phone OFF it resets the lock, so this need to be done each time you'll turn your phone ON :-(
Anyway it's better than nothing, isn't it?
Nokia 2110e/2110i

To view IMEI number *#06#
To view Software Version enter *#170602112302#
If you have latest software version you have to enter *#682371158412125#
Latest Version is under Phone Info
To view Week and Year of manufacture enter *#3283#
On phones prior to 01/01/96 1295 means December 95, On phones after 01/01/96 2196 means 21st week of 1996.
To enter small letters hold down the key for a few seconds and it will turn caps off

Nokia 2110 Pin outs
Pin outs of X100 system connector
ANT 16 9 Charging connector

(O) I-I-I-I-I-I-I-I ( ) ( o )

CON 8 1
The left symbol (O) is the antenna connector for car kits. The symbol numbered 16-9 on the top and 8-1 on the bottom is the system connector. the ( ) is the open space next to the connector and the ( o ) is the charging connector for you home-charger.

PIN Name Description

--- ---- -----------

1,9 GND Digital ground

2 MIC/JCONN External audio input from accessories or hands free microphone. Multiplexed with junction box connection control signal

3 AGND Analogue ground for accessories

4 TDA Transmitted DBUS data to the accessories

5 M2BUS Serial Bidirectional data and control between the hand portable and accessories

6 HOOK/RXD2 Hook indication. HP has a 100KE pull-up resistor.

7 PHFS/TXD2 Hands free device power on/off, data to flash programming device.

8,16 VCHAR Battery charging voltage

10 EAR/HFPWR External Audio output to accessories or hands free speaker

11 DSYNC DBUS data bit sync clock

12 RDA DBUS received data from the accessories

13 BENA Power supply to headset adapter

14 VF Programming voltage for FLASH

15 DCLK DBUS data clock
Battery Connector (on the phone)



|--|--|--|

1 2 3 4



1 ...... GND ground (-)

2 ...... TBAT battery temperature

3 ...... BTYPE -"- type

4 ...... VBATT -"- battery voltage (+)
As you can imagine. YOU CAN DESTROY YOUR NOKIA BY FOOLING AROUND WITH THESE CONNECTIONS. Therefore I accept NO responsibility for any possible damages. My advise to you is to think twice before doing something and if you are going to try make use of a car-kit holder to get access to the X100 connector since it is to tiny to use a self-fashioned connector. IT IS POSSIBLE TO REPROGRAM THE NOKIA 2110 as is indicated by the pin out description so watch it !

DTMF Programming
If you dial in to a service number which requires DTMF strings after you have dialed in, you can program the whole sequence. What you do is:

Key in the number.
Press the * three times: a 'p' appears (pause).
Key in the DTMF code, you can use 'p' again in this string.
Store this in memory.
If you select the memory place, and dial the stored number, the mobile will wait a few seconds (pause) and then send the string as DTMF.
Another option is to press the * four times: a 'w' appears (wait). When the 'w' is reached in the call string, 'DTMF' appears at the left menu button. When you press the left menu button the mobile starts sending DTMF.
Car kit Programming
If you use a car kit with hands free AND additional handset, and you want to switch from handset to hands free:

Press the left menu button, and put the additional handset on hook.
Now you are on hands free.
Interesting thing to try
As you may know, 2110i supports Call Cost Limit function which means that you can limit the maximum of calls from your phone. This function has a feature that it shows the remaining credits in the third row of the display. It should decrease every time you make a call, but if your operator doesn't support this yet, you can display your phone number or anything else there.

And how to do this? First, go to the "DURATION AND COST" menu. Select "CALL COSTS LIMIT". The phone asks you the PIN2-code, you should get it from your operator. After entering PIN2, select "Set". Phone asks you "Limit:". Enter maximum of seven numbers you want to be visible on display, for example my phone number is 0405100210, so I enter 5100210. So these numbers will be last numbers on display.

And then go to back to the "DURATION AND COST" menu. Select "SHOW COST IN". Enter the PIN2-code. Select "Currency". Enter "Unit price:", I recommend setting it "1". Phone asks you "Currency unit:" Enter the maximum of three numbers or letters or symbols you want to be visible as first numbers/letters/ symbols on display. I entered "040".

Now you are ready. Quit the menu and the number should be on the third row of the display! So, on my display, the last row of the display says 0405100210. It stays there even if you switch off your phone. (Of course it disappears while
you dial a number or use the menu etc.)

Nokia 3110

To view IMEI number *#06#
To view Software Version enter *#3110#
*#92702689# - phone asks warranty code:
There are a number of choices here
6232 (OK) : Displays the Month and Year of Manufacture
7332 (OK) : Displays the date of the last repair
7832 (OK) : Displays the date where the phone was purchased
9268 (OK) : Display Serial Number
37832 (OK) : Set the Purchasing Date MM YY
87267 (OK) : Confirm Transfer, Related to firmware upgrade.
*#746025625# - phone says 'SIM CLOCK STOP ALLOWED' or "SIM CLOCK STOP NOT ALLOWED" depending on your SIM Card.
*#7780# restores phone's factory settings.
Type is NHE-8
Pin outs
Desktop Charger----------------------|

| |

| |

CHARGER--| + TOP OF PHONE -

V V 1 2 3 4 5 6 V

(o) | | [= = = = = =] | |

7 8 9 10 11 12
Unlock SP lock
Here is a way to Unlock your phone which is Service Provider locked, without to know SP Lock code !!!!
Give it a try:
First of all, PIN CODE MUST BE ON, then press:
C

C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04* * *your pin#
Each time you turn your phone OFF it resets the lock, so this need to be done each time you'll turn your phone ON :-(
Anyway it's better than nothing, isn't it?

Nokia 3810

To view IMEI number *#06#
To view Software Version enter *#3810#
Pin outs
Desktop Charger----------------------|

| |

| |

CHARGER--| + TOP OF PHONE -

V V 1 2 3 4 5 6 V

(o) | | [= = = = = =] | |

7 8 9 10 11 12

Nokia 6150

*#0000# shows the SW version.
*#06# for checking the IMEI (International Mobile Equipment Identity)
*#92702689# to enter service menu.
 

Nokia 7110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.
*#3370# - better sound quality
*#3370* - better sound quality turned off
*#4720# - bad sound quality, save up to 30% off battery
*#4720* - normal sound quality
*#746025625# - Sim clock allowed status.


Nokia 8110/8110i

To view IMEI number *#06#
To view Software Version enter *#8110#
Latest Version is under Phone Info.
*#92702689# - phone asks 'warranty code:'
There are a number of choices here
6232 (OK) : Displays the Month and Year of Manufacture
7332 (OK) : Displays the date of the last repair
7832 (OK) : Displays the date where the phone was purchased
9268 (OK) : Display Serial Number
37832 (OK) : Set the Purchasing Date MM YY
87267 (OK) : Confirm Transfer, Related to firmware upgrade.
*#746025625# - phone says 'SIM CLOCK STOP ALLOWED' or "SIM CLOCK STOP NOT ALLOWED" depending on your SIM Card.
Type of Phone is NHE-6
Pin outs
Desktop Charger----------------------|

| |

| |

CHARGER--| + TOP OF PHONE -

V V 1 2 3 4 5 6 V

(o) | | [= = = = = =] | |

7 8 9 10 11 12
1 GND Charger/System Ground

2 V_OUT Accessory Output Supply. (Min/Typ/Max - 3.4V...10V - Output Current 50mA)

3 XMIC External Microphone Input and Accessory Identification

Identification

*TYP/MAX: 8...50 mV (The Maximum Value Corresponds to 0dBm Network

Level with input amplifier gain set to 20 dB ,typical value is maximum value -16 dB)

ID Accessory Identification

*1,7...2,05 V Headset Adapter Connected

*1,15...1,4 V Compact Hands free Unit Connected

*2.22...2.56 V Infra Red Link Connected

4 EXT_RF External RF Control Input

Min/Max: 0...0.5V External RF in use

Min/Max: 2.4...3.2V Internal Antenna in use

5 TX FBUS Transmit

6 MBUS Serial Control Bus

*Logic Low Level: 0....0.5V

*Logic High Level:2.4V....3.2V

7 BENA Not Connected

8 SGND Signal Ground

9 XEAR External Speaker and Mute Control

*Min/Typ/Max: 0....32....500 mV (Typical level corresponds to -16 dBM)

Network Level with Volume Control in Nominal Position 8dB Below Maximum

Maximum 0 dBM Maximum Volume Codec Gain -6dB)

Mute ON (HF SPEAKER MUTE ):0...0,5 V d.c.

Mute OFF (HF SPEAKER ACTIVE ): 1,0...1,7 V d.c.

10 Hook Hook Signal

*Hook Off (Handset in Use): 0....0.5V

*Hook On (Handset in Use): 2.4V....3.2V

11 RX FBUS Receive

*Accessory FBUS Receive Signal

12 V_IN Charging Supply Voltage (Max 16V)

Nokia 8810

To view IMEI number *#06#

Nokia 9000/9000i

To view IMEI number *#06#
To view Software Version enter *#682371158412125#
Latest Version is under Phone Info
To view Week and Year of manufacture enter *#3283#

Nokia 3110 Secret Codes

Unlock your Nokia
To unlock your Nokia phone you will need some of the following:
1. Data Cable
2. Unlock Software
3. Extra Help + help Guides

*#06# for checking the IMEI (International Mobile Equipment Identity)

*#7780# restores Factory Settings..(Memory, language, counters not included)

*#3110# for checking the phone's software (SW) - called firmware revision information.
*#746025625# [*#sim0clock#] to check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time)

*#92702689# [*#war0anty#] Phone asks 'warranty code:'

Press the following warranty code:

6232 (OK) : Displays the Month and Year of Manufacture (0997)
7332 (OK) : Displays the date of the last repair - if found ('DATE NOT SAVED'...)
7832 (OK) : Displays (if found) the date where the phone was purchased ('DATE NOT SAVED'...)
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY (Warning: You can only do this once - So be careful ...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another
(e.g. if broken) with 6110 u can transfer all data via IRport. (Confirm Transfer?)

'Fast silent mode'.
In the newer versions (v.7.11->) a quick silent mode can by entered.
Press Menu then #.

The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.
 

Nokia 3210 Secret Codes

Unlock your Nokia
To unlock your Nokia phone you will need some of the following:
1. Data Cable
2. Unlock Software
3. Extra Help + help Guides

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart
*#746025625# - Sim clock allowed status.

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%

Half Rate will give you bad soundquality, which gives the serviceprovider the opportunity to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.

Sim Clock Stop : *#746025625# apparently only works for 3 minuts.


*#92702689# - takes you to a secret menu with 6 choices
1) shows the serial nr.
2) shows when the cel phone was made mmyy
3) shows when the the cel. phone was purchased mmyy
4) shows how many times the cel. phone has been repaired.
5) makes u capebel of transferring user data if u have the gear for it
6) shows how many houres the phone has been on
 

Nokia 3310 Secret Codes

Unlock your Nokia
To unlock your Nokia phone you will need some of the following:
1. Data Cable
2. Unlock Software
3. Extra Help + help Guides



Enhanced Full Rate
For activation enter *#3370#
For deactivation enter *#3370*
In both cases the phone will automatically restart.


Firmware check
*#682371158412125#


Service codes
*#0000# or *#9999# (Not Tested)
1st Line - Software Version
2nd Line - Date of Software release
3rd Line - Phone Type.


*#92702689# or *#92772689# Display the phone's software version.


SIM Clock Stop
*#746025625#
 

Nokia 3330 Secret Codes

Unlock your Nokia
To unlock your Nokia phone you will need some of the following:
1. Data Cable
2. Unlock Software
3. Extra Help + help Guides


Imei Information

To view the imei number on this model simply type *#06#

*#170602112302# shows the SW version.


Service Provider Lock
Service Provider lock is the lock to your phone which is implement by your service provider e.g. Orange onto your sim card.

The phone is usually locked to a certain SP but it can be unlocked allowing you access to other service providers that provide a better deal.


The same effect can also be used by using a Dual sim, you could have two sim cards in one phone allowing you to switch between sims and SP

1. First sim = Orange
2. Second sim = One2One

SMSC (Short Message Serivce Centre Numbers)
SMS Centre number allow you to send free sms, by changing your message centre number like this:

1. Go to messages
2. Message Settings
3. Set 1
4. Message Centre Number
5. Then change the number to one from SMSC Number section


Codes
*#war0anty# - Warranty
This will show your warrnty details *#92702689#
*3370#
Basically increases the quality of calling sound, but decreases battery length.


#3370#
Deactivates the above.


*#0000#
Shows your software version.


*#06#
Shows your IMEI number.


*#sim0clock#
This shows if your phone will allow simclock stoppage.


*4370#
Half Rate Codec activation. It will automatically restart

#4370#
Half Rate Codec deactivation. It will automatically restart

*3001#12345# (TDMA phones only)
This will put your phone into programming mode, and you'll be presented with the programming menu.2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"
Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"
Note: Enter your System ID for Cantel, which is 16401 or 16423. If you don't know yours, ask your local dealer for it.
8) Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for Canada, and 310 for the US. Ask on the forum for any other codes.
12) Power down the phone and power it back on again

ISDN Code
To check the ISDN number on your nokia use this code *#92772689#

Restore Factory Settings
To do this simply use this code *#7780#

Manufacturer Info
Date of Manufacturing *#3283#

Nokia 3810 Secret Codes

Unlock your Nokia
To unlock your Nokia phone you will need some of the following:
1. Data Cable
2. Unlock Software
3. Extra Help + help Guides

*#06# To view IMEI number

*#3810# To view software version

Nokia 1610/1611 Secret Codes

Unlock your Nokia
To unlock your Nokia phone you will need some of the following:
1. Data Cable
2. Unlock Software
3. Extra Help + help Guides



*#06# for checking the IMEI (International Mobile Equipment Identity)
*#170602112302# shows the SW version.

Latest software version on Nokia 1610: v 5.15 (25.02.97) NHE-5NX - older version
V 4.19
Latest software version on Nokia 1611: V 4.03 NHE-5SX

New Info Below

To View IMEI (International Mobile Equipment Identity)
enter *#06#

Firmware version enter
*#170602112302#

Unlock information

Service Provider unlock information

The Service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, and one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

Tips and Tricks

Bypass the SP lock

With some versions of Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked you can bypass the SP lock like this:

1] Insert sim card of diferent provider.
2] Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone says PIN CODE ?
3] Press the "C" key.
4] Then Press * and wait until it desapear and apear again, then press * one more time and 04*PIN*PIN*PIN#

The phone now says: PIN CODE CHANGED (or ACCEPTED)
and the SIM card is accepted until you restart the phone again.

NOTE: On vesion 5.04 (5110) Nokia has removed this option !


FREE sms

Some service number (SMSC) for sending sms can be found around the world.
We have collected some of them and listed them for you:

Denmark: +4528187000

(Only Danish Sonofon subscriber can use this number and only from monday-friday)

Germany: +491722271042
Russia: +78129600096
Unknown: +352091000030
Unknown: +352021100003
Sweden: +46707990001 Comviq
Austrlia +61411990001 Optus

Tip for some service providers:
- Type *n# in the begining of the sms for a status report.
- Type *h# in the begining of the sms to hide your ID.

It seem that TELENOR MOBIL send out letters with the purpose of closing all free servers.

Firmware information


Firmware


The phone should display something similar to this:
5.31
06-01-96
NHE-4

First line
The firmware Version
Second line
The date of the SW release.

Third line
NHE-4 has something to do with the type of phone you are dealing with.
Is it GSM 900 (standard), GSM 1800 (DCS1800) or GSM 1900 (PCS1900)?
Nokia 2110, 3110, 8110(i) are all NHE types. The only thing that vary is the code after NHE- ("4").
NHE = GSM 900, NHK =GSM 1800 - The number in the end = the model (2110i = 4 etc.)


Firmware update


We have been asked a lot about how to update the firmware in Cellular phones.
The easiest thing to do is to go to the nearest cellular dealer and make him do it for you.
Just remember that it is supposed to be free if the garranty has not ran out however a receipt is normally required.


Latest Firmware


Type: NHE-5NX

V 5.23 (00-00-00) NHE-5NX
V 4.19 (00-00-00) NHE-5NX

General information

Cell Broadcast

While Short Message Service (SMS) can be configured as a personal service, Cell Broadcast is a general service which is designed for subscribers of a specific cell or topic. For example, a subscriber to cell 050 in England will receive information on the GSM tower currently being used by their phone. This new concept brings a whole new meaning to the term mobile communications as the phone is now able to receive information such as share prices or weather updates without the need of data cards and computers. At present the following message types exist (note: this may vary from carrier to carrier and some carriers may charge for this service):

Code Title

000 Index
010 Flashes
020 Hospitals
022 Doctors
024 Pharmacy
030 Long Distant Road Reports
032 Local Road Reports
034 Taxis
040 Weather
050 District
052 Network Information
054 Operator Services
056 Directory Inquiries (national)
057 Directory Inquiries (international)
058 Customer Care (national)
059 Customer Care (international)


IMEI Information


XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type Approval Code (first 2 digits = country code of the approval-country )

FAC = Final Assembly Code (01,02 = AEG)
(10,20 Nokia)
(40,41,44 Siemens)
(30 Ericsson)
(50 Bosch)
(51 Sony,Siemens,Ericsson)
(60 Alcatel)
(65 AEG)
(70 Sagem)
(75 Dancall)
(80 Philips)
(85 Panasonic)

SNR = Serial Nr.

SP = Spare (always "0")

NOKIA 5110/5120/5130/5190

IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status: #pw+1234567890+3
SimCard lock status: #pw+1234567890+4

NOKIA 6110/6120/6130/6150/6190

IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #

Nokia N201 Cellular Telephone (170-1499) Programming

1. Turn on phone.

2. Enter *3001#12345.

3. Enter [STO]00. Display says STORE NOT DONE. If it says
"NOT ALLOWED", re-enter.

4. Press and hold [CLR] until display clears.

5. Enter NAM parameters in 1 long string -- 911#*911#0*1234 --
lock code is 1234, language code is 0.

6. Enter [STO]01[STO].

7. Press and hold [CLR] until display clears.

8. Enter the 10 digit phone number.

9. If desired, press [ALPHA] key and enter a name of up to 16
characters. The zero key can be used to enter a blank space.
After the name is entered, press [ALPHA] 10. For Primary NAM
enter [STO] 02 [STO]. For Optional NAM enter [STO] 04 [STO].

10. Press and hold [CLR] until display clears.

11. Enter the system parameters in a single string --
00038*1*1*334*05*10.

12. For Primary Nam, press [STO] 03 [STO]. For Optional Nam press
[STO] 05 [STO].

13. Press and hold [CLR] until the display clears.

14. Press [RCL] followed by one of the memory locations from above
(01 through 05).

15. Verify the information is correct.

16. Power off. Power back on. If NAM ERROR or NO SVC appears (and
service is activated) the programming must be repeated.

Nokia N201

Nokia N201 Cellular Telephone
(170-1499) Programming

1. Turn on phone.

2. Enter *3001#12345.

3. Enter [STO]00. Display says STORE NOT DONE. If it says
"NOT ALLOWED", re-enter.

4. Press and hold [CLR] until display clears.

5. Enter NAM parameters in 1 long string -- 911#*911#0*1234 --
lock code is 1234, language code is 0.

6. Enter [STO]01[STO].

7. Press and hold [CLR] until display clears.

8. Enter the 10 digit phone number.

9. If desired, press [ALPHA] key and enter a name of up to 16
characters. The zero key can be used to enter a blank space.
After the name is entered, press [ALPHA] 10. For Primary NAM
enter [STO] 02 [STO]. For Optional NAM enter [STO] 04 [STO].

10. Press and hold [CLR] until display clears.

11. Enter the system parameters in a single string --
00038*1*1*334*05*10.

12. For Primary Nam, press [STO] 03 [STO]. For Optional Nam press
[STO] 05 [STO].

13. Press and hold [CLR] until the display clears.

14. Press [RCL] followed by one of the memory locations from above
(01 through 05).

15. Verify the information is correct.

16. Power off. Power back on. If NAM ERROR or NO SVC appears (and
service is activated) the programming must be repeated.

Nokia 9110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.

Latest software version: V 5.06 (09.12.99) RAE-2

V 5.02 (26-08-99)RAE-2
V 4.05 RAE-2

Free SMS Tip
1st Way:
1. turn our phone off.
2. turn it on and enter your pin.
3. enter *#746025625# 4. now "SIM CLOCK STOP ALLOWED" will be displayed.
now you can send sms for free. if you turn your phone off and later on you have to reenter this code!!!
In some Networks it doesn't work!!!
2nd Way:
Set Menu 4-3-3 on Usergroup 666 (work with German Networks)

Nokia 9000/9000i

To view IMEI number *#06#
To view Software Version enter *#8110# Latest Version is under Phone Info.
To view Week and Year of manufacture enter *#3283#

Nokia 8110i

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP


TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

*#8110# for checking the phones software (SW) - called firmware revision information.

#746025625# [*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#]
Phone asks 'warranty code:'

Press the following warranty code:

6232 (OK) : Displays the Month and Year of Manufacture (0997)
7332 (OK) : Displays the date of the last repairment - if found ('DATE NOT SAVED'...)
7832 (OK) : Displays (if found) the date where the phone was purchased ('DATE NOT SAVED'...)
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY
(Warning: You can only do this once - So be careful what you write...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to another (eg. if broken) with 6110 u can transfer all data via IRport. (Confirm transfer?)

Software

8110i : Type NHE-6BM
8110 : Type NHE-6BX

8110i SW Versions:

LATEST Version is V 5.20 xx-xx-9x

Software version V 25.10 03-06-98
- An updated GSM operators' list.
- The two hands at startup has been removed (Can anyone tell me what Nokia is trying to say with this startup-screen ping-pong?!).

Software version V 25.00 12-02-98
- An updated GSM operators' list.
- Tingtone 10 was changed.

Software version V 34.23 22-10-97
(hummm...only one day from the older version!!!!!!??)
- Latest known version.
- An updated GSM operators' list.
- Some character changes (eg. the @) when sending sms.)

Software version V 24.23 21-10-97
- An updated GSM operators' list.
- The two hands at startup is back!! (if they were gone at all)

Software version V 24.11 09-09-97
- An updated GSM operators' list.
- Some people say that the two hands at startup has been removed - some don't !

Software version V 24.04 08-08-97
- An updated GSM operators' list.
- Problem with missing service provider name in display solved.

Software version V 24.03 16-07-97
- First known version.
- This version had some problems showing the service provider in the display. Instead it showed some empty space. ???

This is what the Nokia 8110(i) displays when software code is typed.

V 04.51
26-03-98
NHE-6BM

First line:
The Software Version (My guess is that this software has been used in previously Nokia-phones, what do you say?!).

Second line:
The date of the SW release.

Third line:
NHE-8 has something to do with the type of phone you are dealing with. Is it GSM 900 (standard), GSM 1800 (DCS1800) or GSM 1900 (PCS1900)? Nokia 2110, 3110, 8110(i) are all NHE types. The only thing that vary is the code after NHE- ("8"). NHE = GSM 900, NHK =GSM 1800 - The number in the end = the model (2110i = 4 etc.) The 5110 and 6110 is called NSE-1 and NSE-3...this may be because it supports EFR (?)

Software update, how?
I have been asked a lot about how to update the software in your cell phones. The easiest thing to do is to go to the nearest Nokia dealer and make him do it for you. Just remember that it is supposed to be free (a receipt is requiet) so don't let him tell you anything else!

Service Prover Lock
The service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for upto 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)

The main code used in Nokia phones is:
#pw+(master code)+Y#
This code is able to check, activate or remove Sim card restriction (SP-lock).
Use the * key to get the p, + and w chars.
'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Country-Lock status
#pw+1234567890+4# for SimCard-Lock status

# = DOUBLE-CROSS
W = PRESS "*" THREE TIMES
P = PRESS "*" FOUR TIMES
+ = PRESS "*" TWO TIMES
MASTERCODE = 1234567890
Y = NUMBER 1 TO 4

(master code) is a 10 digit code, based on the phones IMEI number.
(I can NOT give you the master code - SO DON'T ASK ME FOR IT !!!!!!!)

Eg. To remove restriction on lock 1 type following code:
#pw+(master code)+1#
If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)
eg. To check if phone if restricted on lock 1 type the following code:
#pw+1234567890+1#

Please NOTE that these codes could be used with care! A user told me that it's only possible to type in about 3 different codes on each lock! Then something bad will happen ..therefore be careful!

Bypass the SP lock
With a Nokia 16xx/21xx/31xx/51xx/81xx that are SIMlocked to one privider you can bypass the SP lock like this:
1: Insert sim card of diferent provider.
2: Turn on the phone and press the UP VOLUME key for 3 sec. then release it and the phone says PIN CODE?
3: Press the "C" key.
4: Then Press * and wait until it desapear and apear again, then press * one more time and 04*PIN*PIN*PIN#


The phone now says: PIN CODE CHANGED (or ACCEPTED) and the SIM card is accepted until you restart the phone again. NOTE: On version 5.04 Nokia has removed this option !

The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with thiskey when speed dialing.

Update from 8110 >8110i impossible....
Even though NHE-6 is found on the bagside of 8110 too an update from that phone to the 8110i is impossible. The reason is simple. The hardware is different which means that the SW capacity in 8110i is bigger than the 8110.

Original Ringtone
If you want the original ringtone back after you have downloaded one you can send a message to yourself containing the text: //SCKL1581 After some time you will recieive a message that you can save, and your original Nokia ringtone is back.

What's a Business Card?
A business card is a special SMS message which is composed as following: //SCKE2 BEGIN:VCARD N:name TEL:number END:VCARD

Hands Free tip
To continue an existing call when placing the 8110i into the hands free car kit without it dropping the call, press the Memory button just before connecting the cable and placing it in the cradle.

Display extra text in call costs feature tip
If your network operator doesn't offer a call costs service, you can still make use of that function to display some personalised text on the screen of your 8110i. Go to Menu, [5], [7], [1], enter PIN2-code and choose Set. Then type in the limit of the currency units you're using (if the call cost service worked, you would have to type the cost limit of the calls) and choose OK. In this case I typed 8110. Then go to the next submenu (Menu, [5], [7], [2]), the Show costs in menu. Type in the PIN2 code again and select Currency. Type in the unit price, in this case number 1. Then type the name of the currency - you can use any string of letters and numbers 1-3 characters long. then type 2 letter then to confirm type two names begining with one of each of the letters. Then press OK to confirm it.

Quick saving while in call tip
Saving numbers to memory during a call If you type a number into your phone during a call, you will lose it when the call ends. To prevent this happening just hold down Memory button -- the number will be saved (with no name) to the next available memory location.

Deleting SMS messages quickly tip
When reading an SMS message, instead of pressing Option, Erase to delete the message, simply press [C].


Turning lights on temporarily tip
If you have display lights turned off, you can turn them on by quickly pressing and releasing the power button. They will stay on as long as you are pressing button.

Silent mode temporarily tip
You can put your phone into silent ringing mode temporarily by pressing Menu then [#].

Closing the cover without ending a call tip
If you press the menu key and then close the sliding cover during a call you will not end your call.

Turning lights on temporarily tip
If you have lights turned off you can turn them on by quickly pressing and releasing the power button . They will stay on as long as You're pressing the button.
This works also in Nokia 3110. Lights will go off after a couple of seconds if no button pressing
 

Nokia 6110

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP


TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

*#0000# To view Software Version.
*#6110# Try this code if the above code doen't work.

#746025625# [*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#]
You don't need the warranty-codes any more - you can just scroll through the information like in any other menu. It has the the same data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer").

Menu:
1: Displays Serial Number.
2: Displays the Month and Year of Manufacture (0997)
3: Displays (if there) the date where the phone was purchased (MMYY) you can here set the Purchasing Date (Warning: You can only do this once - so be careful what you write...)
4: Displays the date of the last repairment - if found (0000)
6: Does anyone know if this is for upgrading the phone's EEPROM?? (Transfer user data?)

Enhanced Full Rate Codec (EFR):
On: Enter *3370# and EFR will be activated after a reboot of the phone ( consumes more power )
Off: Enter #3370# and EFR will be switched off after a reboot of the phone.

Half Rate Codec:
On: Enter *4720# and Half Rate coded will be activated after a reboot of the phone ( better standby time )
Off: Enter #4720# and Half Rate coded will be de-activated after a reboot of the phone

Network Monitor
There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to re-program some chips inside of your phone.

1.Check your software version. You can only continue if you have v4.33, v4.73 or v5.24.
2.Take apart the phone.
3. De-solder the EEPROM (ATMEL AT 24C64).
4. Read out the data with an EEPROM programmer and save it to a file (Backup).
5. If you have v.33 or v4.73, change the address "03B8" from "00" to "FF".
6. If you have v5.24 then change the address "0378" from "00" to "FF".
7. Write the new data to the EEPROM and solder it back to the phone.
8. Power on your phone and you should have "Netmonitor" enabled.

The Network Monitor gives you the following information.

Carrier number

MS RX Level in DBM

Received signal quality

MS TX power level C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99.

RTL (Radio link timeout).

Timeslot

Indication of the transmitter status

Information on the Network parameters.

TMSI (Temporary Mobile Subscriber Identity).

Cell identification (Cell ID, Number of cells being used).

MCC (Mobile country code)

MCN (Mobile network code)

LAC (Location area code)

Ciphering (On/Off)

Hopping (On/Off)

DTX (On/Off)

Discard cell barred information.
The Reboot Trick
Should work on all software versions.
1. Go to calendar (menu - 8)
2. Make note / reminder
3. Enter some text into the edit box
4. Hold clear until whole text is cleared, then press Back
5. Press 0. Main screen is shown but a space appears on the screen. You can't see it of course.
6. Enter 4 digits (1234, for example)
7. Use the down arrow to move the cursor to the left side of the numbers and the space (2 times down arrow)
8. Now enter 6 digits and press the green "Call button".

Wait some seconds...the phone will now flash the background light and finally reboot. The trick should also work on other menus like the profile menu...

The James Bond Trick
If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.

Service Prover Lock
The service provider (SP) lock is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

All Nokia phones (2110 and newer) have four different SIM locks which can be used to lock the phone for upto 4 different providers. But most phones with restriction only have one lock activated. ( lock 1)

The main code used in Nokia phones is:
#pw+(master code)+Y#
This code is able to check, activate or remove Sim card restriction (SP-lock).
Use the * key to get the p, + and w chars.
'Y' has to be 1,2,3 or 4 - depending of what lock you what to deal with.

#pw+1234567890+1# for Provider-Lock status
#pw+1234567890+2# for Network-Lock status
#pw+1234567890+3# for Country-Lock status
#pw+1234567890+4# for SimCard-Lock status

# = DOUBLE-CROSS
W = PRESS "*" THREE TIMES
P = PRESS "*" FOUR TIMES
+ = PRESS "*" TWO TIMES
MASTERCODE = 1234567890
Y = NUMBER 1 TO 4

(master code) is a 10 digit code, based on the phones IMEI number.
(I can NOT give you the master code - SO DON'T ASK ME FOR IT !!!!!!!)

Eg. To remove restriction on lock 1 type following code:
#pw+(master code)+1#
If you just want to check your phone use 10 random numbers Eg. 1234567890 as the (master code)
eg. To check if phone if restricted on lock 1 type the following code:
#pw+1234567890+1#

Please NOTE that these codes could be used with care! A user told me that it's only possible to type in about 3 different codes on each lock! Then something bad will happen ..therefore be careful!

Power Button Tip:
If you press the button for a short moment, the menu with the profiles is shown on the display. If you press one more time, the mobile turns itself off. You can use the up and down cursor keys to scroll and enable a different alert setting.

The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with thiskey when speed dialing.

Free Call Tip
NB. The tips needs Net Monitor enabled. Be aware that the trick wil remove Netmonitor in some sw versions like v4.73, v5.04 and v5.24.

1. Laungh the NetMonitor in your Nokia 51xx / 61xx
2. Execute the test number 497
3. Free calling for about 90 sec should now have been activated.

The trick has not been comfirmed working yet.

Revealing the Headphone and Car-Kit menus
Please note that if you do these next tricks, the new menus can't be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.

1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the word "Headset" will be shown in the display. Menu 3-6 is now enabled.
2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.

Quick SMS Typing
When typing SMS messages, you have to wait some seconds before you can type the next letter if it is in the same button than the previous one. For example try to write the word "letter", you have to wait before you can enter the second "t".. A much faster solution is to press the # button twice and then the letter "t".

Nokia 2010

To view IMEI number *#06#
To view Software Version enter *#9999#

Nokia 3210

*#06# for checking the IMEI (International Mobile Equipment Identity) Information you get from the IMEI:

XXXXXX XX XXXXXX X

TAC FAC SNR SP


TAC = Type approval code
FAC = Final assembly code
SNR = Serial number
SP = Spare

*#0000# To view Software Version.

#746025625# [*#sim0clock#]
Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59.

*#92702689# [*#war0anty#] takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Latest software version: V 5.02 NSE-8/9

V.4.41 NSE-8/9 (17-08-99)0
V 4.11 (???)
V 3.10 NSE-8

*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart

Enhanced Full Rate will give you much b

Nokia 3810

To view IMEI number *#06#
To view Software Version enter *#3810#

Nokia 6080 / 6081

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.

Latest software version on 6080 V 4.80 NHE-2
Latest software version on 6081 V 5.14 NHE-2A

Nokia 6120 / 6160 / 6162 (TDMA phones)

*#92772689# for checking ISDN number.
*3001#12345# for field test mode and nam selection and some other stuff...
*#9999# shows the SW version.
 

Nokia 6150

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.
*#92702689# to enter service menu.

Latest software version 5.22 (10-11-99) NSM-1

Older versions:
5.20 (20-09-99) NSM-1
5.17 (01-07-99) NSM-1

Updates:
1. Updated GSM-list
2. *4720# and #4720# (activate/deactivate Halfrate) doesn't work anymore!
3. New menu option: 4-4-6 Confirm SIM service actions Lets you select whether SIM service actions are visible and confirmed by you.
4. Automatic menu-language selection doesn't work anymore!

V 5.02 (02-02-99) NSM-1
V 4.13 NSM-1 (EFR option should be back in this version)
V 4.12 NSM-1 (EFR option removed in this version)
V 4.11 NSM-1 (EFR option removed in this version)
V 4.02 NSM-1
 

Nokia 6190

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#6190# shows the SW version.
*#92772689# (after removing the analog module) shows service menu.
*3001#12345[OK] to enter test mode.
*#639# to change NAM.

Nokia 7110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# To view Software Version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart
*#746025625# - Sim clock allowed status.
*#92702689# [*#war0anty#] - takes you to a secret menu with 6 choices:

1. Displays Serial Number.
2. Displays the Month and Year of Manufacture (0997)
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repairment - if found (0000)
5. makes you capebel of transferring user data if you have the gear for it
6. shows how many hours the phone has been on

Latest software version: 4.77 25-01-00 NSE-5 - EFR and half rate codes do not work with this version.

V 4.76 13-01-00 NSE-5
V 4.75 07-01-00 NSE-5
V 4.73 15.11.99 NSE-5
 

Nokia 8850

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# To view Software Version.

Latest software version: V 5.11 09-12-99 NSM-2

Older version: V5.08

Nokia 9000/9000i


To view IMEI number *#06#
To view Software Version enter *#8110# Latest Version is under Phone Info.
To view Week and Year of manufacture enter *#3283#

Nokia 9110

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.

Latest software version: v5.02 (26-08-99)RAE-2

V 4.05 RAE-2

General 8810 Secrets/Codes

IMEI number
*#06#

Software Version
*#0000#


1st Line - Software Version
2nd Line - Date of Software release
3rd Line - Phone Type.

Serial Number
*#92702689#

1st Screen - Date of phone manufacture
2nd Screen - Serial #, IMEI
3rd Screen - Purchasing date
4th Screen - Last Repair Date.

.::NOKIA::. TIPS & TRICKS For all Nokia sets
These Nokia codes will work on most Nokia Mobile Phones,

Code Description
*3370# Activate Enhanced Full Rate Codec (EFR) - Your phone uses the best sound quality but talk time is reduced my approx. 5%

#3370# Deactivate Enhanced Full Rate Codec (EFR)

*4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.


#4720# Deactivate Half Rate Codec.

*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type.

*#9999# Phones software version if *#0000# does not work.

*#06# For checking the International Mobile Equipment Identity (IMEI Number).

#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).

*#147# (vodafone) this lets you know who called you last.

*#1471# Last call (Only vodofone).

*#21# Allows you to check the number that "All Calls" are diverted to.

*#2640# Displays security code in use.

*#30# Lets you see the private number.

*#43# Allows you to check the "Call Waiting" status of your phone.

*#61# Allows you to check the number that "On No Reply" calls are diverted to.

*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to.

*#67# Allows you to check the number that "On Busy Calls" are diverted to.

*#67705646# Removes operator logo on 3310 & 3330.

*#73# Reset phone timers and game scores.

*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible.

*#7760# Manufactures code.

*#7780# Restore factory settings.

*#8110# Software version for the nokia 8110.

*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.

*#94870345123456789# Deactivate the PWM-Mem.

**21*number# Turn on "All Calls" diverting to the phone number entered.

**61*number# Turn on "No Reply" diverting to the phone number entered.

**67*number# Turn on "On Busy" diverting to the phone number entered.

12345 This is the default security code.

press and hold # Lets you switch between lines.

 

Copyright © 2006, All rights reserved.